Documentation/4.6/Modules/ResampleDTIVolume
For the latest Slicer documentation, visit the 4.10 page. 
Introduction and Acknowledgements
This work is part of the National Alliance for Medical Image Computing (NAMIC), funded by the National Institutes of Health through the NIH Roadmap for Medical Research, Grant U54 EB005149. Information on NAMIC can be obtained from the NAMIC website.  

Module Description
Resampling an image is a very important task in image analysis. It is especially important in the frame of image registration. This module implements DT image resampling through the use of itk Transforms. The resampling is controlled by the Output Spacing. "Resampling" is performed in space coordinates, not pixel/grid coordinates. It is quite important to ensure that image spacing is properly set on the images involved. The interpolator is required since the mapping from one space to the other will often require evaluation of the intensity of the image at nongrid positions.
Use Cases
Most frequently used for these scenarios:
 Use Case 1:
 Use Case 2:
Tutorials
Links to tutorials that use this module
Panels and their use
Parameters:
 Input/Ouput: Input/output parameters
 Input Volume (inputVolume): Input volume to be resampled
 Output Volume (outputVolume): Resampled Volume
 Reference Volume (To Set Output Parameters) (referenceVolume): Reference Volume (spacing,size,orientation,origin)
 Transform Parameters: Parameters used to transform the input image into the output image
 Transform Node (transformationFile):
 Deformation Field Volume (deffield): File containing the deformation field (3D vector image containing vectors with 3 components)
 Displacement or hField (typeOfField): Set if the deformation field is an Field
 Processing Options:
 Interpolation (interpolationType): Sampling algorithm (linear , nn (nearest neighborhoor), ws (WindowedSinc), bs (BSpline) )
 Tensors Correction (correction): Correct the tensors if computed tensor is not semidefinite positive
 Tensor Transform Type:
 Finite Strain (FS) or \nPreservation of the Principal Direction (PPD) (ppd): Chooses between 2 methods to transform the tensors: Finite Strain (FS), faster but less accurate, or Preservation of the Principal Direction (PPD)
 Advanced Transform Parameters: Those parameters should normally not be modified
 Transforms Order (transformsOrder): Select in what order the transforms are read
 Not a Bulk Transform (notbulk): The transform following the BSpline transform is not set as a bulk transform for the BSpline transform
 Space Orientation inconsistency (between transform and image) (space): Space Orientation between transform and image is different (RAS/LPS) (warning: if the transform is a Transform Node in Slicer3, do not select)
 Advanced Rigid/Affine Parameters:
 Rotation Center (rotationPoint): Center of rotation (only for rigid and affine transforms)
 Centered Transform (centeredTransform): Set the center of the transformation to the center of the input image (only for rigid and affine transforms)
 Image Center (imageCenter): Image to use to center the transform (used only if "Centered Transform" is selected)
 Inverse Transformation (inverseITKTransformation): Inverse the transformation before applying it from output image to input image (only for rigid and affine transforms)
 Manual Output Parameters: Parameters of the output image
 Spacing (outputImageSpacing): Spacing along each dimension (0 means use input spacing)
 Size (outputImageSize): Size along each dimension (0 means use input size)
 Origin (outputImageOrigin): Origin of the output Image
 Direction Matrix (directionMatrix): 9 parameters of the direction matrix by rows (ijk to LPS if LPS transform, ijk to RAS if RAS transform)
 Advanced Resampling Parameters: Parameters used for resampling
 Number Of Threads (numberOfThread): Number of thread used to compute the output image
 Default Pixel Value (defaultPixelValue): Default pixel value for samples falling outside of the input region
 Windowed Sinc Interpolate Function Parameters: Parameters used for the Windowed Sinc interpolation
 Window Function (windowFunction): Window Function \nh = Hamming \nc = Cosine \nw = Welch \nl = Lanczos \nb = Blackman
 BSpline Interpolate Function Parameters: Parameters used for the BSpline interpolation
 Spline Order (splineOrder): Spline Order (Spline order may be from 0 to 5)
 Manual Transform (Used only if no transform node set):
 Transform Matrix (transformMatrix): 12 parameters of the transform matrix by rows ( last 3 being translation )
 Transform Type (transformType): Transform algorithm\nrt = Rigid Transform\na = Affine Transform
List of parameters generated transforming this XML file using this XSL file. To update the URL of the XML file, edit this page.
Similar Modules
 Point to other modules that have similar functionality
References
Publications related to this module go here. Links to pdfs would be useful. For extensions: link to the source code repository and additional documentation
Information for Developers
Section under construction. 