Documentation/4.2/Developers/Tutorials/Debug Instructions/CodeLite

From Slicer Wiki
Revision as of 04:44, 1 December 2012 by JChris.FillionR (talk | contribs) (Page originally created by Inorton user)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Home < Documentation < 4.2 < Developers < Tutorials < Debug Instructions < CodeLite

CodeLite is a relatively lightweight, cross-platform IDE

Configure build

Right-click on project name and select Settings, then Customize

  • Enable Custom Build: check
  • Working Directory: Enter path to Slicer-build, for example /cmn/git/Slicer4-sb/Slicer-build
  • For target "Build": Enter "make"

To configure the binary for the Run command, set Program=Slicer-build/Slicer under the General tab.

Configure debugger

This requires the use of a wrapper script, as detailed here

After setting up the wrapper script ("WrapSlicer4" below), change the following options:

alt text

Under Settings->General:

  • Program = /cmn/git/Slicer4-sb/Slicer-build/WrapSlicer4
  • Working folder = /cmn/git/Slicer4-sb/Slicer-build



alt text

Under Settings->Debugger

  • "Enter here any commands passed to debugger on startup:"
set exec-wrapper /cmn/git/Slicer4-sb/Slicer-build/WrapSlicer
exec-file /cmn/git/Slicer4-sb/Slicer-build/bin/SlicerQT-real