Documentation/4.10/Developers/Tutorials/MigrationGuide

From Slicer Wiki
Jump to: navigation, search
Home < Documentation < 4.10 < Developers < Tutorials < MigrationGuide


For the latest Slicer documentation, visit the read-the-docs.


Migration Guide



Contents

Slicer backward incompatible changes

Slicer 5.3: Organization name and domain changed from NA-MIC to slicer.org

To address the inconsistency between organization name used for settings files and for macOS bundle identifier, the 3D Slicer application has updated the Slicer_ORGANIZATION_NAME from "NA-MIC" to "slicer.org" and Slicer_ORGANIZATION_DOMAIN from www.na-mic.org to slicer.org. At the time of this change, 3D Slicer is developed primarily by the Slicer community rather than the NA-MIC community. Distribution of 3D Slicer is hosted at slicer.org rather than at www.na-mic.org.

Slicer settings will now be under a Slicer directory location rather than NA-MIC. Please review the Settings File Location documentation for details about the settings location on various platforms.

Slicer 5.3: Removed Annotation module

Annotations module, which provides `vtkMRMLAnnotationROI` and `vtkMRMLAnnotationRuler` nodes have been deprecated since April 2021 and is to be removed in Slicer-4.3.

When a scene is loaded into Slicer that contains annotation nodes, they are converted to markup nodes: `vtkMRMLAnnotationROI` is converted to `vtkMRMLMarkupsROI`; and `vtkMRMLAnnotationRuler` is converted to `vtkMRMLMarkupsLine`. All Slicer core modules that previously used annotation nodes, now use markup nodes instead.

All extensions, too, need to be updated to use markup nodes instead of annotation nodes. For backward compatibility (so that the same extension can be used with current Slicer version and Slicer-4.2 and earlier versions), it is useful to keep the modules accept both markup and annotation nodes, but always create markup nodes by default.

Tips for updating a module to use markups:

  • In node selectors, wherever `vtkMRMLAnnotationROINode` is accepted, add `vtkMRMLMarkupsLineNode` _before_ it (so they are both accepted, but markups are preferred)
  • In node selectors, wherever `vtkMRMLAnnotationRuler` is accepted, add `vtkMRMLMarkupsLine` _before_ it (so they are both accepted, but markups are preferred)
  • For ROIs:
    • When only non-rotated ROIs are used: you can still use `GetXYZ()` and `GetRadiusXYZ()` methods work the same way for markups ROI
    • When ROIs are rotated, markups ROIs support built-in rotation and scaling, therefore it is recommended to use the `exportRoi.GetObjectToWorldMatrix()` method to get all the transforms (including the transform inside the markup node and any transforms applied using transform nodes) that are applied to the bounding box object (that has its center in the origin and its diameter returned by `GetSize()`).
  • For rulers:
    • Use `GetNthControlPointPosition(0)` and `GetNthControlPointPosition(1)` methods to get the endpoints of the line.
    • Use `GetNumberOfDefinedControlPoints()` method to check if both endpoints of the line are defined.
    • Use `GetMeasurement('length').GetValue()` to get the line length (or for the displayed string, with units: `getNode('L').GetMeasurement('length').GetValueWithUnitsAsPrintableString()`)

Slicer 5.0: API changes since 4.10

  • Removed protected method vtkMRMLModelDisplayableManager::FindPickedDisplayNodeFromMesh

Supporting only Python 3.6 and above

Slicer python code has been updated to support Python 3.6 and above syntax using pyupgrade to automatically update the syntax.

Install pyupgrade: PythonSlicer -m pip install pyupgrade

  • Running:
    • On 1 file: PythonSlicer -m pyupgrade --py36-plus MyPythonFile.py
    • On multiple files: Here is my pyupgrade-script.py written to automate running pyupgrade across all python files in the Slicer repo. It was run by PythonSlicer pyupgrade-script.py
# pyupgrade-script.py
import os
import subprocess

search_directory = "C:/Users/MyUserName/Documents/GitHub/Slicer"
for root, _, files in os.walk(search_directory):
  for file_item in files:
    file_path = os.path.join(root, file_item)
      if os.path.isfile(file_path) and file_path.endswith(".py"):
        subprocess.call(["PythonSlicer", "-m", "pyupgrade", "--py36-plus", file_path])

Python 2 to Python 3

Slicer core has been updated to only support Python 3.

C++ classes and python scripts have been updated to use idioms and constructs only available in Python 3.

Update to python scripts have been done leveraging the CLI provided by https://python-future.org by (1) iteratively applying each one of the associates "fixes", (2) reviewing associated changes and (3) updating as needed.

Updates specific to extensions are discussed in Documentation/Nightly/Developers/Tutorials/MigrationGuide#Slicer_5.0:_Python2_to_Python3

Interactor styles

Limitations of VTK widgets (editable points, lines, curves, etc.) prevented Slicer from having sophisticated user interaction in slice and 3D views. In Slicer5, we replaced VTK widgets with MRML widgets. These widgets are still VTK-based and somewhat similar to VTK widgets, but they operate directly on MRML nodes, they use direct method calls between widgets and their representation, and they use a more efficient and flexible event processing. Instead of hardcoding how viewers behave in response to interaction (mouse move, button click, keyboard, ...) events in an interactor style, all these events are translated to actions and performed in a MRML widget. Most modules are not expected to observe interactor events or styles directly, but if they did, then they may need to be updated accordingly.

  • vtkSliceViewInteractorStyle renamed to vtkMRMLSliceDViewInteractorStyle to reflect that it uses MRML classes directly.
  • vtkThreeDViewInteractorStyle renamed to vtkMRMLThreeDViewInteractorStyle to reflect that it uses MRML classes directly.

slicer.util functions

  • slicer.util.loadVolume (and other node load functions) now return the loaded node instead of a True/False flag. In case of an error, a RuntimeError exception is thrown.
    • Old way of loading a node and get it in a variable: volumeNode = slicer.util.loadVolume('path/to/volume.nrrd', returnNode=True)[1]
    • New way of loading a node and get it in a variable: volumeNode = slicer.util.loadVolume('path/to/volume.nrrd')

Markups

  • vtkCommand::Modified events are no longer invoked when control points are added/removed/modified to improve performance. Modules that need to know If a point position is modified need to add observers to vtkMRMLMarkupsNode::PointAddedEvent, vtkMRMLMarkupsNode::PointRemovedEvent, vtkMRMLMarkupsNode::PointModifiedEvent events. See example in Script repository.
  • vtkMRMLMarkupsNode::MarkupAddedEvent is renamed to PointPositionDefinedEvent. There is a similar event, vtkMRMLMarkupsNode::PointAddedEvent, which is called even when preview point is created.
  • vtkMRMLMarkupsNode::MarkupRemovedEvent is renamed to vtkMRMLMarkupsNode::PointPositionUndefinedEvent. There is a similar event, vtkMRMLMarkupsNode::PointRemovedEvent, which is called even when preview point is removed.
  • vtkMRMLMarkupsNode::NthMarkupModifiedEvent is replaced by vtkMRMLMarkupsNode::PointModifiedEvent
  • During placement of markups, a preview markup point is created. If number of already placed markup points needs to be determined then GetNumberOfDefinedControlPoints() method can be used.
  • GetDefaultMarkups...() and SetDefaultMarkups...() methods are removed. Instead default display node can be accessed by GetDefaultMarkupsDisplayNode() method and default values can be get/set in that class.
  • vtkMRMLMarkupsNode::GetNthMarkupSelected() is replaced by GetNthControlPointSelected()
  • vtkMRMLMarkupsNode::PointPositionDefinedEvent event is added. This event is invoked whenever position is defined for a new point.
  • vtkMRMLMarkupsNode::PointPositionUndefinedEvent event is added. This event is invoked whenever point with defined position is removed (point is deleted or its position gets undefined).
  • For more details, see vtkMRMLMarkupsNode

Segmentations

Binary labelmap segmentations can now be represented as shared labelmaps. The previous implementation of binary labelmaps was performance intensive as each labelmap was represented using a separate vtkDataObject. Visualizing and editing segmentations that contained a large number of segments could cause performance issues, due to the large number of vtkActors required, as well as calculating masks and overwriting other segments when editing.

By default, newly created segments will now be contained on the same layer. Segments will only be separated into multiple layers if the user creates an overlapping segment when editing.

Segments are now saved as a 4D volume with shared 3D layers. For a segmentation that only uses one layer, the resulting image is a 3D volume. Before saving, the labelmaps will be collapsed into as few layers as possible.

  • seg.nrrd files now contain two additional attributes for each segment: SegmentX_LabelValue and SegmentX_Layer
  • The label value of a segment can be found using vtkSegment::GetLabelValue()
  • Whether or not a segment is shared can be found using vtkSegmentation::IsSharedBinaryLabelmap()
  • The other segments sharing the same labelmap can be found using vtkSegmentation::GetSegmentIDsSharingBinaryLabelmapRepresentation()
  • Segment editor effects should generally use modifySelectedSegmentByLabelmap rather than SetBinaryLabelmapToSegment to manage layer separation
  • Conversion rules now call PreConvert() and PostConvert() before and after conversion to perform pre and post processing steps on the segmentation as a whole
  • The function signature for vtkSegmentationConverterRule::Convert now accepts a vtkSegment rather than two vtkDataObjects
  • slicer.util.arrayFromSegment has been deprecated. slicer.util.arrayFromSegmentBinaryLabelmap and slicer.util.arrayFromSegmentInternalBinaryLabelmap can be used instead
Erase the contents of a single segment
segmentation = segmentationNode.GetSegmentation()
segmentation.ClearSegment(segmentId)
Set labelmap in a segment

Directly, bypassing masking settings:

slicer.vtkSlicerSegmentationsModuleLogic.SetBinaryLabelmapToSegment(orientedImageDataToSet, segmentationNode, segmentId)
Move a segment from a shared labelmap to a separate layer
segmentation = segmentationNode.GetSegmentation()
segmentation.SeparateSegmentLabelmap(segmentId)
Combine all binary labelmaps to as few layers as possible
segmentation = segmentationNode.GetSegmentation()
segmentation.CollapseBinaryLabelmaps(forceToSingleLayer=false)

Get a read-only labelmap for a single segment:

labelmap = slicer.vtkOrientedImageData()
segmentationNode.GetBinaryLabelmapRepresentation(segmentId, labelmap)

(similarly, use GetClosedSurfaceRepresentation with an additional vtk.vtkPolyData parameter to get a read-only surface mesh)

or

labelmapNumpyArray = slicer.util.arrayFromSegmentBinaryLabelmap(segmentationNode, segmentId)
Get a modifiable shared labelmap
labelmap = slicer.vtkOrientedImageData()
segmentationNode.GetBinaryLabelmapInternalRepresentation(segmentId, labelmap)

(similarly, use GetClosedSurfaceInternalRepresentation to get a modifiable surface mesh)

or

labelmapNumpyArray = slicer.util.arrayFromSegmentInternalBinaryLabelmap(segmentationNode, segmentId)
Export segments to models

Model hierarchies no longer exist in Slicer5, but instead various kinds of hierarchies are now replaced by "subject hierarchy", which can accommodate any node types in a single hierarchy. Accordingly, `ExportSegmentsToModelHierarchy`, `ExportAllSegmentsToModelHierarchy`, etc. are replaced by `ExportSegmentsToModels`, `ExportAllSegmentsToModels`, which take a subject hierarchy folder item ID as input. Documentation/Nightly See code example in Script repository.

Smoothing effect

In Slicer-4.11 version before October 29, 2020 (and earlier versions), Gaussian smoothing method's Standard deviation parameter ("GaussianStandardDeviationMm") was interpreted in pixels, while on the user interface and code it was claimed to be in physical units (millimeter). The problem was fixed and now the parameter is in millimeter.

Volume rendering

vtkMRMLVolumeRenderingDisplayNode::SetAndObserveVolumeNodeID method was removed, as display node base class already maintains a pointer to the displayed (volume) node. To associate a volume display node with a volume node, call

volumeNode->AddAndObserveDisplayNodeID(volumeRenderingDisplayNode->GetID());

after both nodes are added to the scene.

vtkSlicerVolumeRenderingLogic::CreateDefaultVolumeRenderingNodes method unnecessarily polluted the scene with ROI node even though the user did not need cropping. In Slicer-5.x we fixed the issue by not creating the ROI nodes automatically. To create a ROI node, you can call vtkSlicerVolumeRenderingLogic::CreateROINode method.

Extract skeleton

Command-line arguments of the module have been updated: - output image is now optional, therefore the output image file name must be specified using "--outputImage" argument - output image centerline voxel value is set to 255 (instead of 1) to make it easier to apply image processing operations on it (values can be interpolated between 0 and 255, while there are no integer values between 0 and 1) - "--dontPrune" is renamed to "--fullTree" for clarity - centerline curve is saved in mrk.json format

MRML node copy API improvements

Slicer-4.10 and earlier had a single Copy() method, which had limitations: - usually implemented deep copy (but sometimes bulk data was just shallow-copied): problem, because for quick browsing of sequences, we need shallow-copy (to avoid copying bulk data, such as vtkImageData) - copied all node properties (except node ID and scene): this required workarounds, whenever we wanted to copy only the content of nodes (but for example keeping node references or node name intact)

In Slicer-4.11, these limitations are addressed, by implementing a CopyContent(vtkMRMLNode* node, bool deepCopy=true) method which allows choosing between deep/shallow copy (create an independent copy of bulk data or pass bulk data pointer) and does not copy node ID, Scene, Name, SingletonTag, HideFromEditors, AddToScene, UndoEnabled, and node references.

To make it easier to introduce this new method into existing classes, helper macros are implemented.

If a class implements CopyContent method then the developer must make sure that CopyContent and HasCopyContent methods are implemented in all parent classes by adding vtkMRMLCopyContentMacro(ClassName) or vtkMRMLCopyContentDefaultMacro(ClassName) to the class headers. vtkMRMLCopyContentDefaultMacro should be used when the class does not have any additional properties (only those that parent classes already copy). CopyContent must be implemented by calling CopyContent of the parent class, and then copy node properties added in he class (preferable using shallow copy for large data, if deepCopy argument was set to false).

If HasCopyContent macro is not added to a class then it cannot be recorded or replayed in Sequences module.

Removed classes

Classes removed due to removing legacy Editor module:

  • vtkITKNewOtsuThresholdImageFilter is replaced by vtkITKImageThresholdCalculator
  • vtkITKGrowCutSegmentationImageFilter is replaced by vtkImageGrowCutSegment (it will be replaced by the ITK implementation https://github.com/Slicer/Slicer/pull/5807)
  • vtkITKTimeSeriesDatabase was removed, it was an incomplete class, not used anywhere
  • vtkITKWandImageFilter was removed, vtkImageThresholdConnectivity (in VTK) can be used instead
  • vtkImageConnectivity was removed, vtkImageThresholdConnectivity (in VTK) can be used instead
  • vtkImageErode was removed, vtkImageDilateErode3D (in VTK) can be used instead
  • vtkImageLabelChange was removed, vtkImageThreshold (in VTK) can be used instead
  • vtkImageSlicePaint was replaced by logic built into qSlicerSegmentEditorPaintEffect
  • vtkImageStash is replaced by vtkSegmentationHistory
  • vtkPichonFastMarching moved to SegmentEditorExtraEffects extension (https://github.com/lassoan/SlicerSegmentEditorExtraEffects)

Classes removed due to removing Charts and DoubleArrays modules:

  • vtkMRMLChartNode is replaced by vtkMRMLPlotNode
  • vtkMRMLChartViewNode is replaced by vtkMRMLPlotViewNode
  • vtkMRMLDoubleArrayNode is replaced by vtkMRMLTableNode (can store any number of columns, not just two)
  • vtkMRMLDoubleArrayStorageNode is replaced by vtkMRMLTableStorageNode
  • qMRMLChartView is replaced by qMRMLPlotView
  • qMRMLChartViewControllerWidget is replaced by qMRMLPlotViewControllerWidget
  • qMRMLChartWidget is replaced by qMRMLPlotWidget

Slicer 5.0: Fiducial List was renamed to Point List

To simplify terms used in Slicer, "Fiducial List" term was renamed to "Point List" on the user interface. The term in the API has not been changed to preserve backward compatibility.

See discussion of the topic here.

Slicer 5.0: SliceIntersectionVisibility was moved from vtkMRMLSliceCompositeNode to vtkMRMLSliceDisplayNode

SliceIntersectionVisibility property (that controls if intersections of other slices should be displayed in the slice view) was stored in vtkMRMLSliceCompositeNode. This was not a good choice because the composite node stores what image layers should be displayed in the slice view and how (what opacity, what blending method, etc.). The property was kept in that class for a long time to preserve backward compatibility, but when interactive slice intersection feature was added and additional properties had to be added that control appearance and behavior of slice intersections, this property was moved into the new vtkMRMLSliceDisplayNode node type and renamed to IntersectingSlicesVisibility.

Scripts that previously used SliceIntersectionVisibility property will now fail with this error:

  AttributeError: 'MRMLCore.vtkMRMLSliceCompositeNode' object has no attribute 'SetSliceIntersectionVisibility'

Those failing scripts can be updated with this example in the script repository: https://slicer.readthedocs.io/en/latest/developer_guide/script_repository.html#turn-on-slice-intersections

Slicer 5.0: SlicerPython was removed. Use PythonSlicer instead

Error message:

SlicerPython executable is obsolete and will be removed. Use PythonSlicer executable instead.
For more details, see https://github.com/Slicer/Slicer/issues/4843

Solution:

Use PythonSlicer instead of SlicerPython

Background:

Python IDEs (specifically PyCharm, but potentially others) only recognize Python*.exe files as Python interpreters.

To allow using Slicer's Python interpreter in these IDEs, we had to add PythonSlicer, but kept SlicerPython around for not immediately breaking things.

This redundancy is confusing for users that we could resolve by simply removing SlicerPython for Slicer5.

References:

https://github.com/Slicer/Slicer/issues/4843

Slicer 5.0: Application must be installed in writable location to install extensions

Extensions are now installed in the application home folder because Python packages are installed there anyway, so the application home folder has to be writable (or Slicer has to be run as admin when you install extensions). It also allows making Slicer fully portable - see details here.

If you want to allow any user to install extensions without admin rights and you only need to use extensions that don’t install Python packages at runtime then you can specify a custom extension install path folder in Slicer-NNN.ini file or revert to the old behavior of Slicer by specifying Slicer_STORE_SETTINGS_IN_APPLICATION_HOME_DIR:BOOL=OFF when configuring your Slicer build.

Slicer 5.0: Models are saved in LPS coordinate system by default

While Slicer uses RAS coordinate system internally, images, transforms, and markups files are stored in LPS coordinate system, because DICOM and all medical image computing software (maybe except a few very old ones) uses LPS coordinate system in files.

However, Slicer has been still using its internal RAS coordinate system in mesh files (STL, VTK, VTP, OBJ, PLY), which caused issues when interfacing with third-party software.

From Slicer-4.11.0-2020-02-26 (revision 28794) models are saved in LPS coordinate system, and mesh files assumed to be in LPS coordinate system by default (if no other coordinate system specified in the file).

Slicer started embedding coordinate system name in mesh files a few years ago (see SPACE=RAS in the file header), so all the files that Slicer saved in recent years will load correctly and any scene files created with any version of Slicer will also load the models with correct orientation, too.

Manual setting of coordinate system (in Add data dialog / Options column) is only needed when loading a mesh file without a scene that were created by Slicer-4.6 (2017-09-27) and earlier; and obj files created by Slicer-4.6 and Slicer-4.8 (between 2016-10-11 and 2018-03-26), or files are created by third-party software in RAS coordinate system.

If you encounter orientation issues when loading a model file, you have the following options:

  • Option A: Specify the coordinate system when you open the model file. In “Add data” dialog, click “Show Options” and then choose “RAS” as coordinate system.
  • Option B: Update the third-party software that generate the mesh to save coordinates in LPS coordinate system instead of RAS coordinate system. Conversion is simple inverting the sign of the first two coordinates.
  • Option C: Write SPACE=RAS in the comment/description field in the mesh file (for STL, OBJ, PLY, VTK file; for VTP files, add in the first value of a vtkStringArray field array named SPACE) to indicate that the values are stored in RAS coordinate system. This option is useful if coordinates have to be stored in RAS coordinate system (for example, for compatibility with other software). See implementation example here.

See more information, discussion of this topic on the Slicer forum.

Slicer 5.0: CLI module descriptor XML files assume LPS coordinate system by default

If SlicerExecutionModel descriptor XML file of a CLI module does not specify coordinate system for a point, pointfile, or region element then the coordinate system is assumed to be "lps". To preserve previous behavior and use "ras" coordinate system instead, add coordinateSystem="ras" to the element.

Slicer 5.0: Sequences extension has been merged into Slicer core

Sequences extension has been merged into Slicer core, therefore extensions do not need to depend on Sequences extension anymore.

SequenceBrowser module has been merged into Sequences module, therefore previous code that used SequenceBrowser module now should use Sequences module instead.

Slicer 5.0: FreeSurfer support has been removed from Slicer core

The loading of FreeSurfer models and scalar overlays, as well as the FreeSurfer-specific color nodes, have been moved to the new SlicerFreeSurfer extension. Tutorials on how to use the FreeSurfer Importer module to load multiple files at once can be found on the SlicerFreeSurfer tutorial page.

Slicer 5.0: Removed Editor module

The legacy Editor module has been deprecated since about 2017 and got removed in November 2021. It is replaced by the much improved Segment Editor module.

Slicer 5.0: Removed Charts and DoubleArrays module

Charts and DoubleArrays module have been deprecated since about 2018 and got removed in November 2021. They are replaced by Plots and Tables modules.

Example of commits

Slicer 5.0 : Avoid typedef of anonymous structure

Due to a recent (but retroactive) C++ rule change, only sufficiently C-compatible classes are permitted to be given a typedef name for linkage purposes. Add an enabled-by-default warning for these cases, and rephrase our existing error for the case where we encounter the typedef name for linkage after we've already computed and used a wrong linkage in terms of the new rule.

To fix warning message similar to:

Slicer/Libs/MRML/Core/vtkMRMLTableStorageNode.h:95:17:
warning: anonymous non-C-compatible type given name for linkage purposes by typedef declaration; add a tag name here [-Wnon-c-typedef-for-linkage]
  typedef struct
                ^
                ColumnInfo
Slicer/Libs/MRML/Core/vtkMRMLTableStorageNode.h:99:5:
note: type is not C-compatible due to this default member initializer
    int ScalarType = VTK_STRING;
    ^~~~~~~~~~~~~~
Slicer/Libs/MRML/Core/vtkMRMLTableStorageNode.h:102:5:
note: type is given name 'ColumnInfo' for linkage purposes by this typedef declaration
  } ColumnInfo;
    ^
For consistency, Use 'using' to a named structure definintion for all 
structures.

Replace code like this:

  typedef struct
  {
    std::string ColumnName;
    std::vector<vtkAbstractArray*> RawComponentArrays;
    int ScalarType = VTK_STRING;
    std::vector<std::string> ComponentNames;
    std::string NullValueString;
  } ColumnInfo;

By this:

  struct StructColumnInfo
  {
    std::string ColumnName;
    std::vector<vtkAbstractArray*> RawComponentArrays;
    int ScalarType = VTK_STRING;
    std::vector<std::string> ComponentNames;
    std::string NullValueString;
  };
  using ColumnInfo = struct StructColumnInfo;


References:

https://reviews.llvm.org/D74103

Slicer 5.0 : Temporary path

Temporary path was stored redundantly application settings (Slicer.ini) in two keys: Modules/TemporaryDirectory and TemporaryPath. Modules/TemporaryDirectory overwrote TemporaryPath at startup, but when temporary path was set via the slicer.app.temporaryPath then it was only written to TemporaryPath.

Changed behavior so that only TemporaryPath is used. Modules/TemporaryDirectory is ignored.

To ensure that temporary path is always writable, it as checked at startup that a file can be created in temporary path and if this check fails then temporary path is reset to default (QDir::tempPath()).

Slicer 5.0 : Always prefer executable CLIs

Previously, if a CLI module was available both as an executable and a shared library, then PreferExecutableCLI application setting was used to determine which one is used. Now always CLIs are always executed in an external process (if an executable is available). Reasons are described in this issue: https://github.com/Slicer/Slicer/issues/4893. The application setting is no more displayed in the GUI and any setting specified in earlier Slicer versions is ignored.

Slicer 5.0 : SlicerApp-real is a console application on Windows

Previously, the application (SlicerApp-real.exe) was built as a GUI application (without console) on Windows, to avoid displaying a terminal window when starting the application. This had the drawback that the Slicer application did not have standard input/output that could be displayed or redirected (for example, for capturing into a file). SlicerApp-real has always been a console application on Linux and macOS, therefore this change makes the software behavior more consistent across platforms.

SlicerApp-real.exe is now built as a console application (see #2934). Displaying of a terminal window is prevented by using a launcher (Slicer.exe) that is built as a GUI application and it starts Slicer with the standard input and outputs redirected.

To display console output: https://slicer.readthedocs.io/en/latest/developer_guide/debugging/overview.html#console-output-on-windows

To launch a command-line terminal using subprocess.Popen that shows a new terminal, specify creationflags=subprocess.CREATE_NEW_CONSOLE argument.

Slicer 4.11: Variable CMAKE_DEFAULT_BUILD_TYPE renamed to Slicer_DEFAULT_BUILD_TYPE

Setting the default build type for single config generator may be done setting Slicer_DEFAULT_BUILD_TYPE instead of CMAKE_DEFAULT_BUILD_TYPE.

Error message similar to:

  CMake Error:
     Generator

       Visual Studio 15 2017

     does not support variable

       CMAKE_DEFAULT_BUILD_TYPE

     but it has been specified.

References:

https://github.com/Slicer/Slicer/pull/4799

Slicer 4.11: teem python module renamed to vtkTeem, explicit import required

  • Since the module provides VTK classes interfacing with "teem", the name is now representative of the class it contains.
  • vtkTeem classes are expected to be used by explicitly importing the module.

Replace code like this:

import teem

class CalculateTensorScalars(object):
  def __init__(self):
    self.dti_math = teem.vtkDiffusionTensorMathematics()

By this:

import vtkTeem

class CalculateTensorScalars(object):
  def __init__(self):
    self.dti_math = vtkTeem.vtkDiffusionTensorMathematics()

Slicer 4.11: Display window/level (brightness/contrast) adjustment

  • A new "Window/level" mouse interaction mode was introduced. Volume display window/level can only be changed if this mode is activated by clicking the corresponding button in the toolbar. The new mouse mode prevents accidental modification of volume window/level (when for example the user accidentally clicked too far from a markup) and it also allows more sophisticated window/level adjustments.
  • New region-based auto window/level feature added: activate "Window/level" mouse mode and use Ctrl + left-click-and-drag to highlight a region and optimize window/level for that (pressing Escape or right-click cancels the operation).
  • Auto window/level reset: activate "Window/level" mouse mode and double-click the left mouse button.
  • Improved auto window/level algorithm to prevent too bright display of images. Window/level is set to display values between 0.1th and 99.9th percentile of gray levels. See details here: https://discourse.slicer.org/t/feedback-requested-how-to-improve-mouse-interaction-in-views/6420.
  • Removed class vtkImageBimodalAnalysis

Slicer 4.10: Registration of runTest function done in ScriptedLoadableModule base class

Following r27617:

  • the ScriptedLoadableModule class takes care of registering the runTest function.
  • the runTest function expects msec keyword argument.

Error message similar to:

Traceback (most recent call last):
  File "/path/to/Slicer-SuperBuild/Slicer-build/bin/Python/slicer/ScriptedLoadableModule.py", line 205, in onReloadAndTest
    test(msec=int(slicer.app.userSettings().value("Developer/SelfTestDisplayMessageDelay")), **kwargs)
TypeError: runTest() got an unexpected keyword argument 'msec'
Reload and Test: Exception!

runTest() got an unexpected keyword argument 'msec'

Replace code like this:

class sceneImport2428(ScriptedLoadableModule):
  [...]
  def __init__(self, parent):
    ScriptedLoadableModule.__init__(self, parent)
    parent.title = "..."
    [...]
    parent.acknowledgementText = "..."
    self.parent = parent 	 
	  	 
    # Add this test to the SelfTest module's list for discovery when the module 	 
    # is created.  Since this module may be discovered before SelfTests itself, 	 
    # create the list if it doesn't already exist. 	 
    try: 	 
      slicer.selfTests 	 
    except AttributeError: 	 
      slicer.selfTests = {} 	 
    slicer.selfTests['sceneImport2428'] = self.runTest 	 
 
  def runTest(self): 	 
    tester = sceneImport2428Test() 	 
    tester.runTest()

  [...]

By this:

class sceneImport2428(ScriptedLoadableModule):
  [...]
  def __init__(self, parent):
    ScriptedLoadableModule.__init__(self, parent)
    parent.title = "..."
    [...]
    parent.acknowledgementText = "..."

  [...]

Slicer 4.9: Update of VTK version from 9.0 to 8.2

Following kitware/VTK@b703d78be, VTK has updated to use version number 8.2 instead of 9.0. This was discussed in on the VTK mailing list in http://vtk.1045678.n5.nabble.com/Discussion-OK-to-change-VTK-s-version-number-from-9-0-to-8-2-tt5748702.html

At first, this VTK commit and its companion kitware/VTK@8a00b357e were both reverted from the Slicer/VTK fork. Then, since having the corresponding changes reverted in VTK was not possible, it was decided to also update Slicer. This was done in the following commits:

  • r27472: COMP: Update c++ classes to support building against VTK >= 9 and VTK >= 8.2
  • r27473: COMP: Update VTK to include version change from 9.0 to 8.2. Fixes #4623

This means that code depending on VTK must also be updated to include similar fixes.

Replace this:

 #if VTK_MAJOR_VERSION >= 9

By this:

 #if VTK_MAJOR_VERSION >= 9 || (VTK_MAJOR_VERSION >= 8 && VTK_MINOR_VERSION >= 2)

and

Replace this:

 #if VTK_MAJOR_VERSION < 9

By this:

 #if VTK_MAJOR_VERSION <= 7 || (VTK_MAJOR_VERSION <= 8 && VTK_MINOR_VERSION <= 1)


Slicer 4.9: ITK_LEGACY_REMOVE is now OFF

In preparation to switch to ITK 5.0, we disable legacy functionality in ITK. This might affect some modules which rely on ITK. Take a look at ITK 4 migration guide before ITK 5 migration guide.

Slicer 4.9: vtkMRMLPlotDataNode renamed to vtkMRMLPlotSeriesNode

Plotting was improved in this commit

Replace this:

 vtkMRMLPlotDataNode

By this:

 vtkMRMLPlotSeriesNode

Slicer 4.9: CMake: Module MIDAS not available

The test infrastructure of your project should be updated to use ExternalData built-in CMake module instead of the specific MIDAS module.

See EMSegment commit r17150 for an example of transition.

This means that instead of using midas_add_test with the MIDAS{path/to/file.ext.md5} syntax for addressing the test data, the function ExternalData_add_target is used by specifying both DATA{path/to/file.ext} and a download target name.

Replace this:

 midas_add_test(NAME test1 COMMAND ...)
 midas_add_test(NAME test2 COMMAND ...)

By this:

 ExternalData_add_test(EMSegmentData NAME test1 COMMAND ...)
 ExternalData_add_test(EMSegmentData NAME test2 COMMAND ...)
 
 [...]
 
 ExternalData_add_target(EMSegmentData)


A key difference with the former approaches is that instead of adding two tests (one named <testName>_fetchData to downoad the data and one running the test command), only one test is added but a common download target is added at the end using ExternalData_add_target function.

This means that test data can now be downloaded in parallel (and cached) at build time instead of testing time.

Slicer 4.9: CMake: Module SlicerMacroCheckExternalProjectDependency not available

Since the module was removed in r26992, consider updating your build system to use CMake module ExternalProjectDependency

Slicer 4.9: CMake: Module SlicerMacroEmptyExternalProject not available

Since the module was removed in r26991

Replace this:

include(SlicerMacroEmptyExternalProject)

[...]

SlicerMacroEmptyExternalProject("${proj}" "${${proj}_DEPENDENCIES}")

By this:

include(ExternalProjectDependency)

[...]

ExternalProject_Add_Empty(${proj} DEPENDS ${${proj}_DEPENDENCIES})

Slicer 4.9: CMake: Module SlicerBlockSetCMakeOSXVariables not available

Since it was renamed to SlicerInitializeOSXVariables in r26982

Replace this:

include(SlicerBlockSetCMakeOSXVariables)

By this:

include(SlicerInitializeOSXVariables)

Slicer 4.9: Application: isRelease() function not available

See #Slicer_4.8:_Application:_isRelease.28.29_function_not_available_or_deprecated

Slicer 4.9: slicer.util.getNode() raises exception if node not found

If slicer.util.getNode() is called and the node is not found then instead of just returning None (Slicer 4.8 behavior), the method now raises a MRMLNodeNotFoundException. This makes code debugging easier (the error is reported when it happens), and in general more consistent with Python conventions.

How to update existing code:

It is advisable to only use slicer.util.getNode in tests, or interactively in the Python console, as its behavior is somewhat unpredictable (it may either found a node by name or ID, and result of wildcard search is even less deterministic). In general, it is recommended to use the MRML scene's GetFirstNodeByName and GetNodeByID methods instead.

Replace this:

n = slicer.util.getNode(nodeNameOrID)

By one of these:

If node is to be found by name:

  n = slicer.mrmlScene.GetFirstNodeByName(nodeName)

If node is to be found by ID:

  n = slicer.mrmlScene.GetNodeByID(nodeID)

If node is to be found by name or ID (slower, less predictable, recommended for testing only):

try:
  n = slicer.util.getNode(nodeNameOrID)
except slicer.util.MRMLNodeNotFoundException:
  n = None

More information: https://github.com/Slicer/Slicer/commit/b63484af1b1b413f35396f8f7efb73e870448bd4

Slicer 4.8: Application: isRelease() function not available or deprecated

Error message similar to:

   Missing/deprecated qSlicerCoreApplication::isRelease()

or

   Missing/deprecated slicer.app.isRelease()


Solution:

Use qSlicerCoreApplication::releaseType() == "Stable"

Summary:

Prior to r26420, the variable Slicer_VERSION_TWEAK was used to check if a "stable release" was built. The variable value was set by updating the sources and defining the variable to an integer greater or equal to 0. In other word, if the variable evaluated to an empty string, a nighty or experimental build was being done, if it evaluated to an integer, a stable release build was being done.

The approach had few issues:

  • the name of the variable was confusing
  • identifying a "stable release" only from a source tree revision was not enough. Indeed the environment defining a "release" is the one found on the build machines used to generate the installer.
  • nightly build are also considered as release

To address this, the CMake variable Slicer_RELEASE_TYPE was introduced. As of 2017-10-04, it can be set to Experimental, Nightly or Stable with Experimental being the value hard-coded in the source.

Identifying a build as "stable" is now explicitly done by setting Slicer_RELEASE_TYPE to Stable at configure time.

Also, since the concept of release types was introduced, the function isRelease() has been removed in favor of releaseType().

References:

https://github.com/Slicer/Slicer/pull/354

Slicer Python Module: modulewidget and others removed.

Summary Python classes formerly in "slicer.moduledm", "slicer.modulelogic", "slicer.modulemrml" and "slicer.modulewidget" are now directly available in the slicer module.

See example of change here.

Rational:

See comments in commit messages referenced blow.

References:

https://github.com/Slicer/Slicer/commit/628f83fe7a6f4e0710e306bcaf7c04b9e3e5e6bd

https://github.com/Slicer/Slicer/commit/9cb5668fde1abc8f0430a91ca37fc29277ceeb4e

MRML: Slicer 4.6: Moved up vtkMRMLStorableNode in the MRML node hierarchy.

Rational:

vtkMRMLStorableNode is not a children of vtkMRMLTransformable node anymore, but directly a children of vtkMRMLNode.

This allows making a node storable without requiring it to be also transformable. It is important for several node types (color maps, tables, etc), which require separate storage node but are not transformable.

References:

Error message similar to:

   /tmp/LongitudinalPETCT/MRML/vtkMRMLLongitudinalPETCTStudyNode.cxx: In member function ‘void vtkMRMLLongitudinalPETCTStudyNode::ObserveRegistrationTransform(bool)’:
   /tmp/LongitudinalPETCT/MRML/vtkMRMLLongitudinalPETCTStudyNode.cxx:478:28: error: ‘class vtkMRMLVolumePropertyNode’ has no member named ‘GetParentTransformNode’
                  && propNode->GetParentTransformNode()
                               ^
   /tmp/LongitudinalPETCT/MRML/vtkMRMLLongitudinalPETCTStudyNode.cxx:480:23: error: ‘class vtkMRMLVolumePropertyNode’ has no member named ‘SetAndObserveTransformNodeID’
                propNode->SetAndObserveTransformNodeID(
                          ^
   /tmp/LongitudinalPETCT/MRML/vtkMRMLLongitudinalPETCTStudyNode.cxx:503:23: error: ‘class vtkMRMLVolumePropertyNode’ has no member named ‘SetAndObserveTransformNodeID’
                propNode->SetAndObserveTransformNodeID(NULL);
                          ^

Solution:

Removes lines and/or refactor code


MRML: Slicer 4.5: Introduction of vtkMRMLLabelMapVolumeNode

Rational:

Before vtkMRMLScalarVolumeNode was used for both scalar and label map volumes and the LabelMap custom MRML node attribute was used for distinguishing between them (0=scalar; 1=label map volume).

This made conversion between labelmap/scalar volumes very easy but made it difficult to customize behavior, display, processing of segmentation information.

Now a new vtkMRMLLabelMapVolumeNode class is used for storing segmentation information (still using vtkMRMLScalarVolume used as base class for backward compatibility; but in the future the base class may be changed to reflect that segmentation can be represented in various ways, not just as volumes).

Error message similar to:

 error: ‘class vtkMRMLScalarVolumeNode’ has no member named ‘SetLabelMap’
    outputVolumeNode->SetLabelMap(1);
                      ^

Solution (part1: down cast to vtkMRMLLabelMapVolumeNode, remove call to SetLabelMap)

Replace lines like:

    vtkMRMLNode* outputNode = d->OutputLabelVolumeMRMLNodeComboBox->currentNode();
    vtkMRMLScalarVolumeNode* outputVolumeNode = vtkMRMLScalarVolumeNode::SafeDownCast(outputNode);
    [...]
    outputVolumeNode->SetLabelMap(1);


with:

    vtkMRMLLabelMapVolumeNode* outputVolumeNode =
      vtkMRMLLabelMapVolumeNode::SafeDownCast(d->OutputLabelVolumeMRMLNodeComboBox->currentNode());
    [...]


Solution (part2: Update UI file):

Replace lines like:

 <widget class="qMRMLNodeComboBox" name="InputLabelVolumeMRMLNodeComboBox">
  <property name="nodeTypes">
   <stringlist>
    <string>vtkMRMLScalarVolumeNode</string>
   </stringlist>
  </property>
  [...]
 </widget>

with:

 <widget class="qMRMLNodeComboBox" name="InputLabelVolumeMRMLNodeComboBox">
  <property name="nodeTypes">
   <stringlist>
    <string>vtkMRMLLabelMapVolumeNode</string>      <------------- Update Here
   </stringlist>
  </property>
  [...]
 </widget>


Solution (part3: Update node selector configuration):

Replace lines like:

 nodeSelector.setNodeTypes(QStringList("vtkMRMLScalarVolumeNode"));
 nodeSelector.addAttribute("vtkMRMLScalarVolumeNode", "LabelMap", "1");

with:

 nodeSelector.setNodeTypes(QStringList("vtkMRMLLabelMapVolumeNode"));


References:


CLI: Slicer 4.3: Add ITKFactoryRegistration library centralizing ITK IO factory registration

Rational:

 Linking against ITKFactoryRegistration ensures that ITK IO factory are properly registered on all supported platforms.

Error message similar to:

 Undefined symbols for architecture x86_64:
 "itk::itkFactoryRegistration()", referenced from:
 _main in ImageMakerTest.cxx.o
 ld: symbol(s) not found for architecture x86_64

Solution:

Replace lines like:

 target_link_libraries(${CLP}Test ${CLP}Lib)

with:

 target_link_libraries(${CLP}Test ${CLP}Lib ${SlicerExecutionModel_EXTRA_EXECUTABLE_TARGET_LIBRARIES})

References:

Slicer Extension updates

Slicer 5.0: Supporting both VTK 8.0 and VTK 9.0

Transition from VTK 8.0 to VTK 9.0

See Documentation/Nightly/Developers/Tutorials/MigrationGuide#Transition_from_VTK_8.0_to_VTK_9.0

Remove building of vtk*PythonD library

With VTK >= 8.90, the vtk*Python and vtk*Python libraries were merged together.

To fix error messages similar to:

CMake Error at MarginCalculatorCommon/CMakeLists.txt:70 (set_target_properties):
  set_target_properties Can not find target to add properties to:
  vtkMarginCalculatorCommonPythonD

The code associated with the PythonD target could be removed to support VTK >= 8.90, or it could be conditionally excluded to support older version of VTK.

References

Slicer 5.0: ITKv4 to ITKv5

To remove support for ITKv4 and only support ITKv5. See Documentation/Nightly/Developers/Tutorials/MigrationGuide#Transition_from_ITK4_to_ITK5, it includes the following sections:

If completely removing support for ITKv4 and only supporting ITKv5 is not possible. It is possible to conditionally include the ITKv4 code.

For example:

#if ITK_VERSION_MAJOR >= 5
  itk::ITK_THREAD_RETURN_TYPE
#else
  ITK_THREAD_RETURN_TYPE
#endif

Example of commits:

Slicer 5.0: Python2 to Python3

Depending on the complexity of the extension, two approaches shall be considered:

  • code base common to Slicer 4.10 and Slicer 5.0. This means backward compatibility with the latest release is maintained.
  • specific branch for each Slicer version (e.g master-4.10 and master)


Example of commits


Step 1

Understanding the scope of changes needed to support Python 3 can be done by:

  1. installing future package (see https://python-future.org/)
    Slicer_DIR=/path/to/Slicer-SuperBuild/Slicer-build
    ${Slicer_DIR}/../python-install/bin/PythonSlicer -m pip install future
    
  2. applying all fixes
      for f in `find ./ -name "*.py"`; do \
        ${Slicer_DIR}/../python-install/bin/PythonSlicer \
          --launch futurize --nobackups --write $f; \
      done
    

    Note Alternatively the future package could be installed in a regular python environment and used from there.

      for f in `find ./ -name "*.py"`; do \
        futurize --nobackups --write $f; \
      done
    

This first step will apply the following transformations:

lib2to3.fixes.fix_apply
lib2to3.fixes.fix_dict
lib2to3.fixes.fix_except
lib2to3.fixes.fix_exec
lib2to3.fixes.fix_exitfunc
lib2to3.fixes.fix_filter
lib2to3.fixes.fix_funcattrs
lib2to3.fixes.fix_getcwdu
lib2to3.fixes.fix_has_key
lib2to3.fixes.fix_input
lib2to3.fixes.fix_intern
lib2to3.fixes.fix_isinstance
lib2to3.fixes.fix_itertools
lib2to3.fixes.fix_itertools_imports
lib2to3.fixes.fix_long
lib2to3.fixes.fix_map
lib2to3.fixes.fix_methodattrs
lib2to3.fixes.fix_ne
lib2to3.fixes.fix_next
lib2to3.fixes.fix_nonzero
lib2to3.fixes.fix_numliterals
lib2to3.fixes.fix_operator
lib2to3.fixes.fix_paren
lib2to3.fixes.fix_raw_input
lib2to3.fixes.fix_reduce
lib2to3.fixes.fix_renamesSlicer migration guide describes how to update the code. See https://www.slicer.org/wiki/Documentation/Nightly/Developers/Tutorials/MigrationGuide/SlicerExtension#Slicer_5.0:_Python2_to_Python3
lib2to3.fixes.fix_repr
lib2to3.fixes.fix_standarderror
lib2to3.fixes.fix_sys_exc
lib2to3.fixes.fix_throw
lib2to3.fixes.fix_tuple_params
lib2to3.fixes.fix_types
lib2to3.fixes.fix_xreadlines
lib2to3.fixes.fix_zip
libfuturize.fixes.fix_absolute_import
libfuturize.fixes.fix_basestring
libfuturize.fixes.fix_cmp
libfuturize.fixes.fix_division_safe
libfuturize.fixes.fix_execfile
libfuturize.fixes.fix_future_builtins
libfuturize.fixes.fix_future_standard_library
libfuturize.fixes.fix_future_standard_library_urllib
libfuturize.fixes.fix_metaclass
libfuturize.fixes.fix_next_call
libfuturize.fixes.fix_object
libfuturize.fixes.fix_print_with_import
libfuturize.fixes.fix_raise
libfuturize.fixes.fix_unicode_keep_u
libfuturize.fixes.fix_xrange_with_import
libpasteurize.fixes.fix_newstyle

expect these two:

lib2to3.fixes.fix_idioms
lib2to3.fixes.fix_ws_comma

Note If the number of changes is large, you should consider applying each fixes independently.


Step 2

Not all changes applied automatically should be integrated. Most of the changes introducing imports from the future python package can simply be removed or removed after making use of try/except or check of sys.version_info[0].

  • Systematic conversion of keys, values or items from dictionaries do not need to be systematically converted from dict_keys/dict_values/dict_items to list. For example, this Slicer r28077 reverted some of the automatic changes applied by the future CLI.
  • Unless python classes implement the object functions next and __unicode__ specific to Python 2, nothing specific should be done and from builtins import object can be removed. Automatic removal of imports can also be automated doing:
 for f in `find ./ -name "*.py"`; do \
   sed -i '/from builtins import object/ d' $f; \
 done
  • Unless there are performances issue associated with using range in Python 2, the from builtins import range can be removed:
 for f in `find ./ -name "*.py"`; do \
   sed -i '/from builtins import range/ d' $f; \
 done
  • If there are performance issue with using range in Python 2, the following could also be done:
 import sys
 if sys.version_info[0] == 2:
   range = xrange
  • Use of aliases can also be avoided by removing
 from future import standard_library
 standard_library.install_aliases()

and instead doing something like this:

 try:
   import queue
 except ImportError:
   import Queue as queue

For a complete list aliases, see https://python-future.org/reference.html#module-future.standard_library

  • Use of old_div() function can generally be avoided by using int()

Step 3

The lib2to3.fixes.fix_idioms transformation should explicitly be applied:

  for f in `find ./ -name "*.py"`; do \
    ${Slicer_DIR}/../python-install/bin/PythonSlicer \
      --launch futurize -f lib2to3.fixes.fix_idioms --nobackups --write $f; \
  done

Slicer 5.0: Python2 to Python3 (EditorEffect imports)

Error:

    from EditorLib import EditorLib
ImportError: cannot import name 'EditorLib'

Import of Editor classes should be updated. For example, see r28122.


Before:

import EditorLib
from EditorLib.EditOptions import HelpButton
from EditorLib.EditOptions import EditOptions
from EditorLib import EditUtil
class TemplateKeyEffectOptions(EditorLib.LabelEffectOptions):
  [...]


After:

import EditorLib
from EditorLib import EditOptions, HelpButton
from EditorLib import EditUtil
from EditorLib import LabelEffectOptions, LabelEffectTool, LabelEffectLogic, LabelEffect
class TemplateKeyEffectOptions(LabelEffectOptions):
  [...]

Slicer 5.0: Python packaging dicom to pydicom

The dicom python package has transitioned to become the pydicom python package. The dicom package is no longer included and all previous usages should be transitioned to use the pydicom package. See the Transition to pydicom 1.x migration guide.

Slicer 4.9: Explicit include of ExternalProject module not needed anymore

Following r26984, calling find_package(Slicer REQUIRED) and include(${Slicer_USE_FILE}) ensure the ExternalProject CMake module is included.

Note that ExternalProjectDependency CMake module is also included.

Slicer 4.9: Explicit passing of CMAKE_OSX_* variables not needed anymore

Following r26983, calling find_package(Slicer REQUIRED) and include(${Slicer_USE_FILE}) initializes CMAKE_OSX_* variables and ensures the variables CMAKE_OSX_ARCHITECTURES, CMAKE_OSX_SYSROOT and CMAKE_OSX_DEPLOYMENT_TARGET are passed to all external projects when configuring SuperBuild based extension.

Slicer 4.9: Explicit initialization of CMAKE_BUILD_TYPE not needed anymore

Following r26978, calling find_package(Slicer REQUIRED) and include(${Slicer_USE_FILE}) initializes CMAKE_BUILD_TYPE and ensures the variables CMAKE_BUILD_TYPE and CMAKE_CONFIGURATION_TYPES are passed to all external projects when configuring SuperBuild based extension.

The module SlicerInitializeBuildType is automatically included in UseSlicer CMake module.

Slicer 4.9: Subversion not required anymore

Following r27060, Subversion is not required anymore.

Example of commits

Slicer 4.9: Support EP_GIT_PROTOCOL and use of ExternalProject_SetIfNotDefined for setting GIT_REPOSITORY, GIT_TAG and alike

Following r26957, extension may use the following convention to define GIT_REPOSITORY and GIT_TAG, this allows developer to override the value before the first configuration by setting the corresponding environment variable, or by explicitly configuring the project with that variable.

The option EP_GIT_PROTOCOL is also already set in ExternalProjectDependency module included by Slicer and its value is updated based on the <SUPERBUILD_TOPLEVEL_PROJECT>_USE_GIT_PROTOCOL option.

  ExternalProject_SetIfNotDefined(
    ${CMAKE_PROJECT_NAME}_${proj}_GIT_REPOSITORY
    "${EP_GIT_PROTOCOL}://github.com/jcfr/shape4D.git"
    QUIET
    )

  ExternalProject_SetIfNotDefined(
    ${CMAKE_PROJECT_NAME}_${proj}_GIT_TAG
    "12fef84ca2a56feffc59d8159bdadd2ce4a4138e" # slicersalt-2018-01-22-c74c766a4c
    QUIET
    )

See:

Slicer 4.9: Use ExternalProject_AlwaysConfigure to force reconfigure of inner project

Following r26551, the function ExternalProject_AlwaysConfigure may be used to ensure the inner project is always reconfigured.

Using the `BUILD_ALWAYS` option supported by ExternalProject_Add will not have the intended effect.

See https://cmake-artichoke.readthedocs.io/en/latest/ExternalProjectDependency.html#function:ExternalProject_AlwaysConfigure

Slicer 4.9: Specifying external projects to install in SuperBuild extension

Following r27267 and r27232, the following should be used to ensure the extension can also be bundled into a Slicer custom application. When bundled, the variable ${EXTENSION_NAME}_CPACK_INSTALL_CMAKE_PROJECTS is then used to update the application's list of project to install.

#-----------------------------------------------------------------------------
set(EXTENSION_CPACK_INSTALL_CMAKE_PROJECTS)
#list(APPEND EXTENSION_CPACK_INSTALL_CMAKE_PROJECTS "${Foo_DIR};Foo;RuntimeLibraries;/")
set(${EXTENSION_NAME}_CPACK_INSTALL_CMAKE_PROJECTS "${EXTENSION_CPACK_INSTALL_CMAKE_PROJECTS}" CACHE STRING "List of external projects to install" FORCE)

#-----------------------------------------------------------------------------
list(APPEND CPACK_INSTALL_CMAKE_PROJECTS "${CMAKE_BINARY_DIR};${EXTENSION_NAME};ALL;/")
list(APPEND CPACK_INSTALL_CMAKE_PROJECTS "${${EXTENSION_NAME}_CPACK_INSTALL_CMAKE_PROJECTS}")
include(${Slicer_EXTENSION_GENERATE_CONFIG})
include(${Slicer_EXTENSION_CPACK})

Slicer 4.9: Generating (Extension)Config.cmake

Initially introduced in r25944, and later improved in r25991, including ${Slicer_EXTENSION_GENERATE_CONFIG} ensure a config is generated and allow an extension to import targets from another extension by using find_package(ExtensionName REQUIRED).

[...]

include(${Slicer_EXTENSION_GENERATE_CONFIG})
include(${Slicer_EXTENSION_CPACK})

Slicer 4.9: Initializing <projectName>_BUILD_SLICER_EXTENSION option: Standalone vs Slicer extension build

The following snippet allows to automatically initialize <projectName>_BUILD_SLICER_EXTENSION to ON if Slicer_DIR is defined.

#-----------------------------------------------------------------------------
# Standalone vs Slicer extension option
#-----------------------------------------------------------------------------

# This option should be named after the project name, it corresponds to the
# option set to ON when the project is build by the Slicer Extension build
# system.

set(_default OFF)
set(_reason "${PROJECT_NAME}_BUILD_SLICER_EXTENSION is ON")
if(NOT DEFINED ${PROJECT_NAME}_BUILD_SLICER_EXTENSION AND DEFINED Slicer_DIR)
  set(_default ON)
  set(_reason "Slicer_DIR is SET")
endif()

option(${PROJECT_NAME}_BUILD_SLICER_EXTENSION "Build as a Slicer Extension" ${_default})

set(_msg "Checking if building as a Slicer extension")
message(STATUS ${_msg})
if(${PROJECT_NAME}_BUILD_SLICER_EXTENSION)
  message(STATUS "${_msg} - yes (${_reason})")
else()
  message(STATUS "${_msg} - no (${PROJECT_NAME}_BUILD_SLICER_EXTENSION is OFF)")
endif()
mark_as_superbuild(${PROJECT_NAME}_BUILD_SLICER_EXTENSION:BOOL)

Transition from VTK7-Qt4 to VTK8-Qt5

This section lists categories of code changes necessary to build and run Slicer with VTK 8.0 and Qt5. Each category has a short description, a suggested upgrade path, and references to relevant commits (TBD once merged).

Slicer SuperBuild Extension: Enable C++11 in external projects

SuperBuild extensions may have to enable C++11 for their external projects. Add the following lines to CMAKE_CACHE_ARGS in ExternalProject_Add

   -DCMAKE_CXX_STANDARD:STRING=${CMAKE_CXX_STANDARD}
   -DCMAKE_CXX_STANDARD_REQUIRED:BOOL=${CMAKE_CXX_STANDARD_REQUIRED}
   -DCMAKE_CXX_EXTENSIONS:BOOL=${CMAKE_CXX_EXTENSIONS}

Suggested commit message:

COMP: Enable C++11 in external projects

See https://www.slicer.org/wiki/Documentation/Nightly/Developers/Tutorials/MigrationGuide/VTK7-Qt4-to-VTK8-Qt5#Slicer_SuperBuild_Extension:_Enable_C.2B.2B11_in_external_projects

Error message similar to:

/path/to/Slicer-build/ITKv4-build/Modules/Core/Common/itkConfigure.h:59:6: warning: #warning "WARNING:  The current project is configured to use a C++ standard version older than the C++ standard used for this build of ITK" [-Wcpp]
     #warning "WARNING:  The current project is configured to use a C++ standard version older than the C++ standard used for this build of ITK"
      ^

Qt5: Update loadable modules to use new plugin macros

In Qt5, the Q_EXPORT_PLUGIN, Q_EXPORT_PLUGIN2 macros have been deprecated in favor of the new Q_PLUGIN_METADATA macro.

Error message similar to:

error: static assertion failed: Old plugin system used

Suggested commit message:

COMP: Qt5: Fix error: static assertion failed: Old plugin system used

See https://www.slicer.org/wiki/Documentation/Nightly/Developers/Tutorials/MigrationGuide/VTK7-Qt4-to-VTK8-Qt5#Qt5:_Update_loadable_modules_to_use_new_plugin_macros

Solution (part 1):

In qSlicer<NameOfModule>Module.h, replace lines like:

  Q_OBJECT
  Q_INTERFACES(qSlicerLoadableModule);

with:

  Q_OBJECT
#ifdef Slicer_HAVE_QT5
  Q_PLUGIN_METADATA(IID "org.slicer.modules.loadable.qSlicerLoadableModule/1.0");
#endif
  Q_INTERFACES(qSlicerLoadableModule);

Solution (part 2):


In qSlicer<NameOfModule>Module.cxx, Replace lines like:

Q_EXPORT_PLUGIN2(qSlicer<NameOfModule>Module, qSlicer<NameOfModule>Module);

with:

#if (QT_VERSION < QT_VERSION_CHECK(5, 0, 0))
#include <QtPlugin>
Q_EXPORT_PLUGIN2(qSlicer<NameOfModule>Module, qSlicer<NameOfModule>Module);
#endif

References:

Qt5: Update DesignerPlugin to use QtUiPlugin/QDesignerCustomWidgetInterface

In Qt5, the QtDesigner/QDesignerCustomWidgetInterface header have been deprecated in favor of the new QtUiPlugin/QDesignerCustomWidgetInterface header.

Error message similar to:

/path/to/include/QtDesigner/QDesignerCustomWidgetInterface:4:4: warning: #warning Header <QtDesigner/QDesignerCustomWidgetInterface> is deprecated. Please include <QtUiPlugin/QDesignerCustomWidgetInterface> instead. [-Wcpp]
 #  warning Header <QtDesigner/QDesignerCustomWidgetInterface> is deprecated. Please include <QtUiPlugin/QDesignerCustomWidgetInterface> instead.
    ^

Suggested commit message:

COMP: Update designer plugin to support Qt5

See https://www.slicer.org/wiki/Documentation/Nightly/Developers/Tutorials/MigrationGuide/VTK7-Qt4-to-VTK8-Qt5#Qt5:_Update_DesignerPlugin_to_use_QtUiPlugin.2FQDesignerCustomWidgetInterface

Solution (part 1):

In Widgets/DesignerPlugins/qSlicer<NameOfModule>ModuleWidgetsAbstractPlugin.h, replace lines like:

#include <QDesignerCustomWidgetInterface>

with:

#include <QtGlobal>
#if (QT_VERSION < QT_VERSION_CHECK(5, 0, 0))
#include <QDesignerCustomWidgetInterface>
#else
#include <QtUiPlugin/QDesignerCustomWidgetInterface>
#endif

Solution (part 2):

In Widgets/DesignerPlugins/qSlicer<NameOfModule>ModuleWidgetsAbstractPlugin.h, replace lines like:

Q_INTERFACES(QDesignerCustomWidgetInterface);

with:

#if (QT_VERSION >= QT_VERSION_CHECK(5, 0, 0))
  Q_PLUGIN_METADATA(IID "org.qt-project.Qt.QDesignerCustomWidgetInterface")
#endif
  Q_INTERFACES(QDesignerCustomWidgetInterface);

Qt5: Update DesignerPlugin to use QtUiPlugin/QDesignerCustomWidgetCollectionInterface

Error message similar to:

/path/to/5.9.1/gcc_64/include/QtDesigner/QDesignerCustomWidgetCollectionInterface:4:4: warning: #warning Header <QtDesigner/QDesignerCustomWidgetCollectionInterface> is deprecated. Please include <QtUiPlugin/QDesignerCustomWidgetCollectionInterface> instead. [-Wcpp]
 #  warning Header <QtDesigner/QDesignerCustomWidgetCollectionInterface> is deprecated. Please include <QtUiPlugin/QDesignerCustomWidgetCollectionInterface> instead.
    ^

Solution (part 1):

In Widgets/DesignerPlugins/qSlicer<NameOfModule>ModuleWidgetsPlugin.h, replace lines like:

#include <QDesignerCustomWidgetCollectionInterface>

with:

#include "vtkSlicerConfigure.h" // For Slicer_HAVE_QT5

 // Qt includes
#ifdef Slicer_HAVE_QT5
#include <QtUiPlugin/QDesignerCustomWidgetCollectionInterface>
#else
#include <QDesignerCustomWidgetCollectionInterface>
#endif

Solution (part 2):

In Widgets/DesignerPlugins/qSlicer<NameOfModule>ModuleWidgetsPlugin.h, replace lines like:

Q_INTERFACES(QDesignerCustomWidgetCollectionInterface);

with:

#if (QT_VERSION >= QT_VERSION_CHECK(5, 0, 0))
  Q_PLUGIN_METADATA(IID "org.qt-project.Qt.QDesignerCustomWidgetInterface")
#endif
   Q_INTERFACES(QDesignerCustomWidgetCollectionInterface);

Qt5: any use of QWebKit needs to switch to QWebEngine

TBD

Qt5: QVTKOpenGLWidget

When using Qt5, QVTKOpenGLWidget should be used in place of QVTKGLWidget.

To ensure that QVTKOpenGLWidget receives a properly configured OpenGL context it's necessary to call QSurfaceFormat::setDefaultFormat() before constructing the QApplication instance. QVTKOpenGLWidget::defaultFormat() supplies a suitable format, although it's recommended to disable multisampling for full compatibility with advanced rendering techniques. See http://doc.qt.io/qt-5/qopenglwidget.html.


Error message similar to:

 error: no matching function for call to ‘QVTKWidget::QVTKWidget(QWidget*&)’
        scalarsToColorsView = new QVTKWidget(ctkVTKDiscretizableColorTransferWidget);
                                                                                   ^

Solution (part 1):

In NameOfClass.h file, replace lines like:

 #include <QVTKWidget.h>

with:

 #if CTK_USE_QVTKOPENGLWIDGET
 #include <QVTKOpenGLWidget.h>
 #else
 #include <QVTKWidget.h>
 #endif


Solution (part 2):

In NameOfClass.h file, replace lines like:

 QVTKWidget* View;

with:

 #if CTK_USE_QVTKOPENGLWIDGET
   QVTKOpenGLWidget* View;
 #else
   QVTKWidget* View;
 #endif


Solution (part 3):

In NameOfClass.cpp file, replace lines like:

 this->View = new QVTKWidget;

with:

 #if CTK_USE_QVTKOPENGLWIDGET
   this->View = new QVTKOpenGLWidget;
 #else
   this->View = new QVTKWidget;
 #endif

Qt5: Fix error: 'class QString' has no member named 'toAscii'

Replace call to toAscii().data() with toLatin1().data()

References:

Qt5: Fix error: ‘class QHeaderView’ has no member named ‘setResizeMode’

Error message similar to:

 error: ‘class QHeaderView’ has no member named ‘setResizeMode’
    headerView->setResizeMode(FileColumn, QHeaderView::Stretch);

Solution:

Replace lines like:

 headerView->setResizeMode(FileColumn, QHeaderView::Stretch);

with:

 #if (QT_VERSION < QT_VERSION_CHECK(5, 0, 0))
   headerView->setResizeMode(FileColumn, QHeaderView::Stretch);
 #else
   headerView->setSectionResizeMode(FileColumn, QHeaderView::Stretch);
 #endif

Solution for Python:

 from packaging import version
 ...
 def _setSectionResizeMode(header, *args, **kwargs):
   """ To be compatible with Qt4 and Qt5 """
   if version.parse(qt.Qt.qVersion()) < version.parse("5.0.0"):
     header.setResizeMode(*args, **kwargs)
   else:
     header.setSectionResizeMode(*args, **kwargs)
 ...
 _setSectionResizeMode(horizontalHeader, 1, qt.QHeaderView.ResizeToContents)

VTK8: Use hierarchy files for VTK Python wrapping

In VTK8 it's necessary to generate hierarchy files for proper wrapping VTK classes in Python. Without the information provided by the hierarchy files, the Python wrapping tool lacks complete information about classes and types. In this case, the generated classes contain methods that shouldn't be wrapped and fail to compile, and include references to types such as vtkTypeBool. Once the hierarchy files are generated and provided to the Python wrapping tool, the generated classes compile and typedefs like vtkTypeBool are correctly resolved.

Once the VTK8 changes are merged, generating hierarchy files is handled by https://github.com/Slicer/Slicer/blob/master/CMake/vtkMacroKitPythonWrap.cmake.

References:

VTK8: Use of vtkTypeMacro requires to use the correct base class

Error message similar to:

error: expected unqualified-id before 'protected'

This error is usually a symptom of an incorrect base class when using vtkTypeMacro.

Solution:

Assuming the class vtkIGTLToMRMLPoint derives from vtkIGTLToMRMLBase,

Replace lines like:

vtkTypeMacro(vtkIGTLToMRMLPoint,vtkObject);

with:

vtkTypeMacro(vtkIGTLToMRMLPoint,vtkIGTLToMRMLBase);

References:

VTK8: Copy constructor and equal operator should be disabled

Error message similar to:

error: use of deleted function 'vtkMyClass::vtkMyClass(const vtkMyClass&)'

This error is usually a symptom of not disabling the copy constructor and equal operator.

Solution:

Replace lines like:

protected:
  vtkMyClass();
  ~vtkMyClass();

with:

protected:
  vtkMyClass();
  ~vtkMyClass();
  vtkMyClass(const vtkMyClass&);
  void operator=(const vtkMyClass&);

VTK8: Call InitializeObjectBase() in vtkObject New() methods

In VTK8 it's necessary for vtkObject New() methods to call InitializeObjectBase() on the new object for proper tracking with vtkDebugLeaks. The standard macros (vtkStandardNewMacro, vtkObjectFactoryNewMacro) handle this. For those classes that don't use the macros, add a call to InitializeObjectBase() immediately after constructing the object by new vtkXXX().

Additionally, vtkObjectFactory::CreateInstance() now doesn't register the class name with vtkDebugLeaks if the factory fails to create the object. Therefore, it's no longer necessary to unregister the class name with vtkDebugLeaks. Remove calls to vtkDebugLeaks::DestructClass(className) following vtkObjectFactory::CreateInstance().

To support both VTK8 and earlier versions of VTK, wrap these changes in preprocessor checks for whether VTK_HAS_INITIALIZE_OBJECT_BASE is defined.

References:

VTK8: Add C++11 keywords

VTK8 requires C++11. Subclasses of VTK classes must mark overridden methods with VTK_OVERRIDE.

VTK8: vtkWindowToImageFilter::SetMagnification() is deprecated

VTK8.1 deprecated vtkWindowToImageFilter::SetMagnification() and vtkWindowToImageFilter::GetMagnification(). Replace calls to those methods with SetScale() and GetScale(). See https://github.com/Kitware/VTK/commit/af0a95fa7dd4e25ef869a0bc6077e547f18baa29.

VTK8: vtkInstantiator is deprecated

VTK8.1 deprecated vtkInstantiator. See https://github.com/Kitware/VTK/commit/11bb6a4d395e877847355a63de2e2e8f8d9e1d91

Error message similar to:

/path/to/SlicerIGT-Release/ToolWatchdog/MRMLDM/WatchdogInstantiator.cxx:10:1: error: expected constructor, destructor, or type conversion before ‘void’
 void WatchdogInstantiator::ClassInitialize()
 ^
/path/to/SlicerIGT-Release/ToolWatchdog/MRMLDM/WatchdogInstantiator.cxx: In static member function ‘static void WatchdogInstantiator::ClassFinalize()’:
/path/to/SlicerIGT-Release/ToolWatchdog/MRMLDM/WatchdogInstantiator.cxx:21:3: error: ‘vtkInstantiator’ has not been declared
	 vtkInstantiator::UnRegisterInstantiator("vtkMRMLWatchdogDisplayableManager", vtkInstantiatorvtkMRMLWatchdogDisplayableManagerNew);
	 ^
/path/to/SlicerIGT-Release/ToolWatchdog/MRMLDM/WatchdogInstantiator.cxx:21:80: error: ‘vtkInstantiatorvtkMRMLWatchdogDisplayableManagerNew’ was not declared in this scope
	 vtkInstantiator::UnRegisterInstantiator("vtkMRMLWatchdogDisplayableManager", vtkInstantiatorvtkMRMLWatchdogDisplayableManagerNew);
	                                                                              ^

Solution (part 1):

Update associated CMakeLists.txt replacing lines like:

set(VTK_USE_INSTANTIATOR_NEW 1)
if(${VTK_VERSION_MAJOR} GREATER 5)
  include(${VTK_CMAKE_DIR}/vtkMakeInstantiator.cmake)
endif()
VTK_MAKE_INSTANTIATOR3("${MODULE_NAME}Instantiator"
  displayable_manager_instantiator_SRCS
  "${displayable_manager_SRCS}"
  "${${KIT}_EXPORT_DIRECTIVE}"
  ${CMAKE_CURRENT_BINARY_DIR}
  "${KIT}Export.h"
  )

with:

SlicerConfigureDisplayableManagerObjectFactory(
  TARGET_NAME ${KIT}
  SRCS "${displayable_manager_SRCS}"
  EXPORT_MACRO "${${KIT}_EXPORT_DIRECTIVE}"
  EXPORT_HEADER "${KIT}Export.h"
  OUTPUT_SRCS_VAR displayable_manager_instantiator_SRCS
  )

Solution (part 2):

Update associated qSlicer<NameOfModule>Module.h (or any test requiring displayable manager) adding lines like:

 // DisplayableManager initialization
 #include <vtkAutoInit.h>
 VTK_MODULE_INIT(vtkSlicer<NameOfModule>ModuleMRMLDisplayableManager)


Solution (part 2 - maintaining backward compatibility with Slicer 4.8):

 #include <vtkSlicerVersionConfigure.h> // For Slicer_VERSION_MAJOR, Slicer_VERSION_MINOR
 
 
 [...]
 
 // DisplayableManager initialization
 #if Slicer_VERSION_MAJOR == 4 && Slicer_VERSION_MINOR >= 9
 #include <vtkAutoInit.h>
 VTK_MODULE_INIT(vtkSlicer<NameOfModule>ModuleMRMLDisplayableManager)
 #endif

For example, see https://github.com/SlicerIGT/SlicerIGT/pull/155/commits/2f866ea8872435b9a3a7382dd0549231da00406f

VTK 8.2: Signature of vtkFSLookupTable::MapValue updated

The signature of the function was updated in Kitware/VTK@43f6ee3

Error message similar to:

 error: invalid conversion from ‘const unsigned char*’ to ‘unsigned char*’ [-fpermissive]
 overriding virtual function return type differs and is not covariant from 'vtkLookupTable::MapValue'

Solution:

Update code to use `const` keyword. For example, see r26708

Slicer scripted module initialization steps after application startup

In Slicer 4.8 and earlier versions, those module initialization steps that required application startup completed, often were called using a singleshot timer, because timer events were only processed after the application startup was completed. In Slicer 4.9, some event processing is performed before the application startup is completed, therefore instead of relying on a timer, the application's startupCompleted() signal must be used.

Replace line like:

   qt.QTimer.singleShot(0, self.myAdditionalInitializationSteps)

with:

   slicer.app.connect("startupCompleted()", self.myAdditionalInitializationSteps)

Transition from VTK6 to VTK7

This section lists categories of code changes necessary to build Slicer with VTK 7.1. Each category has a short description, an example error message, a suggested upgrade path, and references to relevant commits.

Referencing this list might be helpful if Slicer extensions require updates to be compatible with VTK 7.1.

Deprecated the vtkStreamer class hierarchy

VTK has deprecated the vtkStreamer class hierarchy.

Error message similar to:

'VTK_INTEGRATE_FORWARD' : undeclared identifier

Solution:

Replace lines like:

#include "vtkStreamer.h"

with:

#include "vtkHyperStreamline.h"

References:

Deprecated vtkMatrix4x4::operator[] method

VTK has deprecated the vtkMatrix4x4::operator[] method.

Error message similar to:

binary '[' : 'vtkMatrix4x4' does not define this operator or a conversion to a type acceptable to the predefined operator

Solution:

Replace lines like:

(*mat)[i][j] = val;
val = (*mat)[i][j];

with:

mat->SetElement(i, j, val);
val = mat->GetElement(i, j);

References:

Removed vtksys/ios, vtksys/stl compatibility layers

VTK has removed the vtksys/ios and vtksys/stl compatibility layers.

Error message similar to:

Cannot open include file: 'vtksys/ios/iostream': No such file or directory

Solution:

Replace lines like:

#include <vtksys/ios/iostream>
#include <vtksys/ios/sstream>

vtksys_ios::ofstream ofs;

with:

#include <iostream>
#include <sstream>

std::ofstream ofs;

Replace lines like:

#include <vtksys/stl/string>
#include <vtksys/stl/vector>

vtksys_stl::string str;
vtksys_stl::vector<double> vec;

with:

#include <string>
#include <vector>

std::string str;
std::vector<double> vec;

References:

vtkDataArray refactored

VTK has refactored the vtkDataArray class hierarchy.

Error message similar to:

'class XXX’ has no member named ‘SetTupleValue’

Solution:

Replace lines like:

array->GetTupleValue(0, val);
array->SetTupleValue(0, val);
array->InsertTupleValue(i, val);
array->InsertNextTupleValue(val);

with:

array->GetTypedTuple(0, val);
array->SetTypedTuple(0, val);
array->InsertTypedTuple(i, val);
array->InsertNextTypedTuple(val);

Replace lines like:

#include <vtkDataArrayTemplate.h>

<any reference to "vtkDataArrayTemplate">

with:

#include <vtkAOSDataArrayTemplate.h>

<reference to "vtkAOSDataArrayTemplate">

References:

Deprecated pipeline update methods

VTK has deprecated and replaced certain pipeline update methods.

Error message similar to:

'class XXX’ has no member named ‘SetUpdateExtent’

Solution:

Follow suggestions in VTK changelog: https://github.com/Kitware/VTK/blob/master/Documentation/Doxygen/ChangesVTK-7-1.md#pipeline-update-methods

References:

Updated Python wrapping

VTK has updated its Python wrapping to support Python 3 and to wrap more code by default.

Symptoms:

Compile or link error while building a Python-wrapped class or library.

Solution 1:

In CMakeLists.txt, add the WRAP_EXCLUDE_PYTHON property anywhere that the WRAP_EXCLUDE property is defined on source files.

Solution 2:

Replace lines of code like:

//BTX
...
//ETX

with:

#ifndef __VTK_WRAP__
...
#endif // __VTK_WRAP__

References:

vtkMTimeType

VTK introduced a specific type—vtkMTimeType—to be used for vtkObject modified time (MTime).

Error message similar to:

vtkDiffusionTensorGlyph::GetMTime': overriding virtual function return type differs and is not covariant from 'vtkObject::GetMTime'

Solution:

Update code that uses unsigned long or unsigned long int for modified times to use vtkMTimeType.

References:

vtkStandardNewMacro expects vtkObjectFactory.h

Error message similar to:

 expected constructor, destructor, or type conversion before ‘;’ token
   vtkStandardNewMacro(vtkSlicerModelClipLogic);

Solution:

Add:

 #include <vtkObjectFactory.h>

Transition from VTK5 to VTK6

This section documents required change to make Slicer code work with VTK6.


Use SetInputPolyDataConnection and GetPolyDataConnection

Starting with Slicer r24801, support for VTK5 API was removed and VTK6 API should be used.

Error message similar to:

error: ‘class vtkMRMLModelDisplayNode’ has no member named ‘SetInputPolyData’
 resultDisplay->SetInputPolyData(resultModel->GetPolyData());
                ^

Solution:

Replace occurrences of SetInputPolyData/GetPolyData with SetInputPolyDataConnection/GetPolyDataConnection.

Use AllocateScalars

Starting with Slicer r24801, support for VTK5 API was removed and VTK6 API should be used.

Error message similar to:

  error: no matching function for call to ‘vtkImageData::SetNumberOfScalarComponents(int)’
    mp_phi->SetNumberOfScalarComponents(1);
                                         ^

Solution:

Replace lines like:

 imageData->SetScalarTypeToUnsignedShort();		
 imageData->SetNumberOfScalarComponents(1); // image holds one value intensities		
 imageData->AllocateScalars(); // allocate storage for image data

with:

 imageData->AllocateScalars(VTK_UNSIGNED_SHORT, 1); // allocate storage for image data