Modules:OpenIGTLinkIF-Documentation-3.4

Return to Slicer 3.4 Documentation

Gallery of New Features

Module Name

OpenIGTLink IF

Screenshot shows GUI of OpenIGTLink IF during volume reslicing based on the tracking data imported from the external program through OpenIGTLink.

Prototype integration of a neurosurgical robot and Slicer3 using OpenIGTLink, Junpei Arata and Hideo Fujimoto, Nagoya Institute of Technology, Japan

General Information

Module Type & Category

Type: Interactive

Category: IGT

Authors, Collaborators & Contact

• Junichi Tokuda: SPL, Brigham and Women's Hospital
• Nobuhiko Hata: SPL, Brigham and Women's Hospital

Module Description

The OpenIGTLink Interface Module is a program module for network communication with external software / hardware using OpenIGTLink protocol. The module provides following features:

• Data import: The module can import position, linear transform and image data from OpenIGTLink-compliant software to the MRML scene.
• Data export: The module can export linear transform and image data from the MRML scene to external software.
• Multi-connection: The module can manage multiple OpenIGTLink connections at the same time.
• Locator visualization: The user can choose one of linear transforms in the MRML scene to visualize its position and orientation in the 3D space.
• Slice driving: The module can control volume re-slicing plane based on linear transform in the MRML scene.

The figure shows an example schematic diagram where multiple devices are communicating with 3D Slicer through the OpenIGTLink Interface. Each connector is assigned to one of the external devices for TCP/IP connection. The connectors serve as interfaces between the external devices and the MRML scene to convert an OpenIGTLink message to a MRML node or vice versa.

Usage

Example Applications and Use Cases

• MRI-compatible Robot System (BRP Project between BWH, Johns Hopkins University and Acoustic MedSystems Inc., "Enabling Technologies for MRI-Guided Prostate Interventions")
  • The 3D Slicer was connected to the MRI-compatible Robot by using OpenIGTLinkIF to send target position and to get current robot position. It was also connected to the MRI scanner to control scan plane for real-time image and receive MR images from the scanner.
• Neurosurgical Robot Project(Nagoya Institute of Technology, Japan)
  • The 3D Slicer was connected to the optical tracking system (Optotrak, Northern Digital Inc.) to acquire current position of the end-effector of the robot.

Tutorial 1: Importing Tracking Data from Tracking Simulator

Step 1: Simulators

First, we prepare simulators to test connections between the 3D Slicer and external programs. The simulators come with The OpenIGTLink Library. You can also obtain the binaries from the following links:

• For Linux (x86, 32-bit).
• For Linux (x86, 64-bit).
• For Windows (32-bit).
• For Mac OS X (x86)
• For Mac OS X (PPC).

Step 2: 3D Slicer

The OpenIGTLink Interface module is included in the nightly release. The binaries can be found at Download page for Slicer Nightly Build. If you interested in building by your self, please see Bulid Instructions.

Step 3: Connecting the Tracker Client

Before connect the simulator to the 3D Slicer, we configure the OpenIGTLink Interface as a "server" by the following steps:

1. Select "OpenIGTLinkIF" from "Modules:" menu. The OpenIGTLink IF will show up on the 3D Slicer window.

2. Open "Connectors" frame, and press "Add" button below the "Connectors" list to add a new connector

3. Once the connector is created, choose "Server" check box in the "Type" option, then clinck "Active" check box. Now the Slicer is ready to accept connections through Open IGT Link.

If the "Status" column in the connector list indicates that the connector is waiting, it is ready to connect the client program to the 3D Slicer.

Step 4: Visualizing the tracking data

1. Open "Visualization / Slice Control", and choose "Tracker (TRANSFORM)" from "Locator Source" menu.

2. Then click "Show Locator" check button. The locator model shows up and move around in the 3D view.

Tutorial 2: Importing Image Data from Imaging Simulator

Step 1-3: Setting up 3D Slicer and simulators

Follow Step 1-3 in Tutorial 1.

Step 4: Connecting the Imager Client

To connect the tracking simulator, open a terminal (Linux and Mac) or command prompt (Windows), move to the directory containing simulator programs downloaded in Step 1, and run it. If you built the OpenIGTLink library by yourself, the binaries for the example programs (simulators) are in <OpenIGTLink-build>/bin.

$ cd <simulator directory>

To send dummy image data to the Slicer running on localhost with frame rate of 10 fps, run ImagerClieant.

$ ./ImagerClient  localhost 18944 10 <sample image directory>

The sample images comes with the simulator program. If you build the OpenIGTLink library, the sample images are located in <source directory>/Examples/Imager/img/. If you are using binary version of the simulator, the sample images are in "img/" directory.

As we have seen in Tutorial 1, the "Status" column indicates "ON", if the client program connects to the 3D Slicer. If the image data is correctly received, "IMAGE" data shows up in the Data I/O Configuration tree (in the Data I/O configuration tab).

Step 5: Visualize the received image in the 2D viewer

Once the image is successfully imported to MRML, you can display it in the 2D and 3D viewers by the following steps. In the "Visualization" section, choose real-time image source from "RT image source" drop-down menu, after you receive the first image from the client. The name of image source is defined by the name of the OpenIGTLink message. In case of the example program, this is "ImagerClient".

Then choose image plane driver from red pull-down menu bellow the "RT image source" menu. You will see the real-time image in the 2D image viewer.

Step 6: Visualize the received image in the 3D viewer

Check the "Orient" button bellow the image plane driver menu (indicated by red circle (1) in the screenshot bellow). If you activate the reslice image in the 3D viewer by clicking the button with "eye" icon in the 2D image viewer panel (indicated by red circle (2) in the screenshot bellow) , you can see the real-time image at the scanning plane in the 3D viewer.

Tutorial 3: Reslicing 3D volume by tracking tool

Step 1-4: Setting up 3D Slicer and tracking simulators

Follow Step 1-4 in Tutorial 1.

Step 4: Loading volume data

See Data loading documentation page.

Step 5: Reslice in Axial/Sagittal/Coronal

Goto "Visualization / Slice Control" section in the OpenIGTLink IF module and choose "Locator" from image plane driver drop-down menu (or just simply press "Locator All" button to turn all menus to Locator. You will see the section(s) of the volumes at the needle tip in Axial / Sagittal / Coronal plane in the 2D viwer(s). You may also be able to see them in the 3D space by clicking the "eye" buttons in the 2D viewer panels. (NOTE: Reslicing function usually increase the CPU load. Low tracking frame rate (say 1-2 fps) is recommended.)

Step 6: Reslice in parallel and perpendicular to the tracking tool

To cut the volume in parallel or perpendicular to the tracking tool, check "Orient" bellow the driver drop-down menues in the "Visualization" section.

Tutorial 4: Exporting transform data from 3D Slicer using OpenIGTLink to external software

Step 1: Preparing client software to receive transform data

Please follow the Step 1 in Tutorial 1. The package contains ReceiveClient, which receives OpenIGTLink transform messages through the network and displays their value on the console.

Step 3: Setting up the connector

Before connect the simulator to the 3D Slicer, we configure the OpenIGTLink Interface as a "server" by the following steps:

1. Select "OpenIGTLinkIF" from "Modules:" menu. The OpenIGTLink IF will show up on the 3D Slicer window.

2. Open "Connectors" frame, and press "Add" button below the "Connectors" list to add a new connector

3. Once the connector is created, choose "Server" check box in the "Type" option, then clinck "Active" check box. Now the Slicer is ready to accept connections through Open IGT Link.

If the "Status" column in the connector list indicates that the connector is waiting, it is ready to connect the client program to the 3D Slicer.

Quick Tour of Features and Use

• Connectors:
  • Connector panel is used to add, delete and edit connectors.
• Data I/O Configurations:
• Visualization / Slice Control:

Development

Dependencies

The OpenIGTLink IF module requires The OpenIGTLink Library. The library comes with the binary package of 3D Slicer 3.4. If you build Slicer by yourself, Slicer3/Script/getbuildtest.tcl will download and build the library in Slicer3-lib directory automatically.

Known bugs

Follow this link to the Slicer3 bug tracker.

Usability issues

Follow this link to the Slicer3 bug tracker. Please select the usability issue category when browsing or contributing.

Source code & documentation

See ViweCV page for the source code.

Links to documentation generated by doxygen.

More Information

Acknowledgment

This work is supported by 1R01CA111288, 5U41RR019703, 5P01CA067165, 1R01CA124377, 5P41RR013218, 5U54EB005149, 5R01CA109246 from NIH. This study is also in part supported by NSF 9731748, CIMIT, Intelligent Surgical Instruments Project of METI (Japan).

References

1. Tokuda J, Fischer GS, Papademetris X, Yaniv Z, Ibanez L, Cheng P, Liu H, Blevins J, Arata J, Golby A, Kapur T, Pieper S, Burdette EC, Fichtinger G, Tempany CM, Hata N, OpenIGTLink: An Open Network Protocol for Image-Guided Therapy Environment, Int J Med Robot Comput Assist Surg, 2009 (In print)