Difference between revisions of "Slicer3:Module:Deformable BSpline registration"

Revision as of 12:29, 30 May 2008

Home < Slicer3:Module:Deformable BSpline registration

Return to Slicer Documentation

This module was implemented by Jim Miller and is based on the ITK b-spline implementation.

Parameters:
- Grid Size: smaller number means coarser grid. Higher number means finer grid
IO
- Intial Transform: If you ran the affine registration first, you can select that transformation as a start pose
- Output trasnform: is not fully functional yet
- specify fixed and moving image
- Output Volume: select create new volume
click Apply

@@ Line 1: / Line 1: @@
-Please copy the template linked below, paste it into this page and customize it with your module's information.
+ [[Documentation|Return to Slicer Documentation]]
-[[Slicer3:Module_Documentation_Template | Slicer3:Module Documentation Template]]
+This module was implemented by Jim Miller and is based on the ITK b-spline implementation.
+*Parameters:
+**Grid Size: smaller number means coarser grid. Higher number means finer grid
+*IO
+**Intial Transform: If you ran the affine registration first, you can select that transformation as a start pose
+** Output trasnform: is not fully functional yet
+** specify fixed and moving image
+** Output Volume: select create new volume
+* click Apply